Where you are looking to create a floating floor working directly off joists then the isolation strip is a very cost effective means of doing so.
The Soundstop Joist Isolation Strip is the first acoustic joist treatment which combines low cost with effective sound attenuation. The isolation strip is made from over 90% recycled rubber, moulded in a dense material to give superior soundproofing performance.
The isolation strip profile also includes a self-adhesive backing which sticks tightly to a rough cut or planed standard nominal 50mm joist resulting in a stable floating floor surface, completely isolated from the rest of the structure. The product is also available in a 100mm width, allowing it to be used on walls to isolate wooden stud structure.
The top contact surface optimises the acoustic attenuation properties of the rubber. By moving the mass layer above the resilient layer the floating element forms a stiffer structure spreading the load and lessening the diaphragm affect, whilst the resilient layer acts to dampen and absorb the sound energy.
Product Application
Where you are looking to create a floating floor working directly off joists then the isolation strip is a very cost effective means of doing so.
The isolation strip fit snugly onto the existing joists up to a width of 50mm. A floating tongue and groove floor (typically tongue and groove chipboard) can then be installed on top of it. We would recommend the use of angled flanking band in this set up to effectively seal the sides of the floating floor.
A superb, easy to fit, the Soundstop Joist Isolation Strip can be used in both new build and refurbishment projects for timber and masonry builds.
This product, used upside down, can also provide the resilient layer required for customers to make up their own resilient battens.
Our experience has shown that this product will produce around 3-5 dB of improvement in sound attenuation.
Here are the main details for this product:
Dimensions: 50mm x 10m
Thickness: 5mm
Pack Size: 1 Roll
Weight: 725kg/m3
Density: NA
Coverage: 0.5 sqm
Fire rating: NA
Thermal Conductivity:
Visit our Fitting Instructions section for more detailed instructions relating to your specific application.
Please contact our team if you have any questions on this product.
Looking for a complete soundproofing solution?
If your looking for soundproofing for a particular situation or application, then the best place to start is with our soundproofing solutions that cover walls, floors, ceilings and reducing echo. Select the relevant application below to find out more.
Wall Solutions
Floor Solutions
Ceiling Solutions
Echo Solutions
Check out our Echo solutions
If your looking for echo reduction for a particular situation or application, then the best place to start is with our echo solutions.
Echo Solutions
Instructions for use
The isolation strip can be fitted from either above or below the joists and even before the joists are fitted.
FSimply removed the self-adhesive backing and sit the strip over the joist ensuring the base is located tightly with the joist surface. It is advised that the joist surface is clear of dust and grime before attaching the strip as this may reduce the adhesive properties.
In all applications, our perimeter isolation strip must be used so the floating floor is fully isolated for the structural floor and walls.
Care should be taken to comply with all relevant Safety and Building Regulations.
Visit our Fitting Instructions section for more detailed instructions relating to your specific application.
Check out our Soundproofing Guides for more information, advice and tips on all aspects of soundproofing.