Skip to content
Call us on 0208 123 9710 | Email us at
Call us on 0208 123 9710 | Email us at

Tecsound FT55 AL Acoustic Pipe Wrap

Original price £119.95 - Original price £119.95
Original price
£119.95 - £119.95
Current price £119.95

  • Great for walls, floors, and ceilings

  • Market leading performance

  • 5.5m x 1.20m Highly dense flexible soundproofing layer

A very high performance acoustic membrane that improves both impact and airborne passage of sound.

Tecsound FT 55 AL is a very high performance acoustic pipe wrap. Its primary function for use in effective pipe sound proofing. It consists of Tecsound synthetic acoustic membrane, porous felt and coated on the outside with reinforced aluminium foil.

It increases the acoustic insulation of the pipe by around 25db Rw. This high performance is due mainly to the inclusion of highly absorbent Tecsound and high density membrane.

Product Application

Tecsound FT 55 AL is used for acoustic insulation of drain pipes, waste pipes and water pipes. It is also highly effective in soundproofing air conditioning vents. It is used in soundproofing industrial pipes and vents also.

The product is regularly used to improve the performance of PVC soil pipes and down pipes that can make bathrooms very noisy.

The product also has application in car soundproofing where road noise is substantially reduced. It should be applied to foil side facing upward/outward.

Here are the main details for this product:

Dimensions: 5.5m x 1.20m (+/- 2%)

Thickness: 12.6mm

Pack Size: 1 Sheet

Weight: 5.6kg/m2 (Roll weight 37kg)

Density: NA

Coverage: 6.6 sqm

Fire rating: M1

Thermal Conductivity:

Visit our Fitting Instructions section for more detailed instructions relating to your specific application.

Please contact our team if you have any questions on this product.

Walls, Floors and Ceilings

Tecsound is utilised in a number of our wall, floor and ceiling solutions, head over to the relevant type to find out more:

Wall Solutions

Floor Solutions

Ceiling Solutions

The Tecsound FT 55 AL is easily used. The product should be cut into suitable width strips such that it will wrap around the offending pipe. The overlap once wrapped around should be in the order of 10cm or quarter the circumference of the pipe whichever is smaller. The pipe is simply fastened using the appropriate length of plastic cable tie. The cable ties should be every 20cm or so. Ideally the overlaps should be sealed with an aluminium backed foil tape.

Where the pipe is boxed in, ideally use a double layer of plasterboard to finish, filling the void where possible with mineral wool.

Visit our Fitting Instructions section for more detailed instructions relating to your specific application.

Check out our Soundproofing Guides for more information, advice and tips on all aspects of soundproofing.